Aluminium Backframe for Wall Decoration

Before you start, you'll need the following to hand:

• The My-Picture.co.uk aluminium backframe
• 2 screws with matching Rawl plugs
• Pencil
• Drill
• Spirit level

Hanging Small/Medium Wall Decoration – Full Instructions

• Remove the protective film from the adhesive strip and place the aluminium backframe on the back of your print, in the centre.
• Press firmly.
• Lay your print flat, face down, and leave it so that the adhesive can set.
• Using the pencil, mark two points on the wall where the screws will go.
• Use a spirit level to make sure the holes are level.
• Drill the two holes and insert the Rawl plugs and screws.
• That's it! Now you can hang your print by resting it on the ends of the screws.